init-cursor: ASCII-подсказка после dot-source (без em dash).

README: краткая шпаргалка; install.sh как install.ps1 (SSH/HTTPS авто).
init-cursor: подсказка после dot-source.
2026-06-19 23:43:33 +10:00 · 2026-06-19 23:41:57 +10:00 · 2026-06-19 23:37:35 +10:00 · 2026-06-19 23:34:45 +10:00 · 2026-06-19 23:33:53 +10:00 · 2026-06-19 23:32:31 +10:00
18 changed files with 1675 additions and 30 deletions
@@ -1,24 +1,114 @@
 # Rules

-Правила и скрипты для настройки нового компьютера: Cursor rules, git remotes, home Gitea.
+Скрипты для Cursor rules, SSH и git remotes (`kalinamall`, `home`, `github`).

-## Первичная настройка
+## Быстро: что запускать
+
+| Ситуация | Windows | Mac / Linux |
+|----------|---------|-------------|
+| **Новый комп** (ничего не настроено) | Скопировать `install.ps1` с рабочего ПК → запустить в каталоге проекта | То же с `install.sh` |
+| **Комп уже настраивали** (`~/CursorRules` есть) | `init-cursor` в каталоге проекта | `init-cursor` |
+| **Только обновить rules** | `init-cursor -Update` | `init-cursor --update` |
+
+Скрипты **сами** проверяют SSH, clone, ключи и remotes. Вручную выбирать SSH/HTTPS не нужно.
+
+---
+
+## Новый компьютер
+
+Нужен только **git**. Repo приватный — `curl`/`irm` по raw-URL **не работают**.
+
+### 1. Скопировать один файл с рабочей машины

 ```powershell
-git clone https://git.kalinamall.ru/PapaTramp/Rules $HOME\CursorRules
+# Windows — с другого ПК (пример)
+scp user@work-pc:CursorRules/install.ps1 $env:TEMP\
 ```

-Добавьте `init-cursor` в профиль PowerShell (один раз):
-
-```powershell
-. $HOME\CursorRules\init-cursor.ps1
+```bash
+# Mac — с другого ПК
+scp user@work-pc:CursorRules/install.sh /tmp/
 ```

-## В каждом проекте
+USB, общая папка — тоже подходит.
+
+### 2. Запустить в каталоге **вашего проекта**

 ```powershell
-cd C:\path\to\repo
+# Windows
+cd C:\path\to\your-repo
+& $env:TEMP\install.ps1
+```
+
+```bash
+# Mac
+cd ~/projects/your-repo
+bash /tmp/install.sh
+```
+
+Скрипт сам:
+1. Клонирует Rules в `~/CursorRules` (SSH → если не вышло, HTTPS с логином)
+2. Настраивает SSH-ключи и Gitea API (если ещё нет)
+3. Копирует rules в текущий проект, настраивает remotes
+4. Добавляет `init-cursor` в профиль shell
+
+---
+
+## Уже настроенный компьютер
+
+```powershell
+cd C:\path\to\your-repo
 init-cursor
 ```

-Скрипт копирует `.cursorignore` и `.cursor/rules/*.mdc`, при необходимости дополняет `.gitignore`, настраивает remotes (`home`, `github`, `kalinamall`) и создаёт репозиторий на home Gitea через API.
+```bash
+cd ~/projects/your-repo
+init-cursor
+```
+
+Если команда не найдена — один раз:
+
+```powershell
+. $HOME\CursorRules\init-cursor.ps1   # Windows
+```
+
+```bash
+source ~/CursorRules/init-cursor.sh   # Mac
+```
+
+---
+
+## Обновить rules / скрипты
+
+```powershell
+init-cursor -Update          # Windows
+```
+
+```bash
+init-cursor --update         # Mac
+```
+
+Обновит `$HOME/CursorRules` с Gitea и перекопирует rules в проект.
+
+---
+
+## Git remotes (в каждом проекте)
+
+| Remote | Куда |
+|--------|------|
+| `kalinamall` | git.kalinamall.ru |
+| `home` | git.papatramp.ru |
+| `github` | github.com/PTah |
+
+Push: `git push kalinamall`
+
+---
+
+## Конфиги (`local/`)
+
+| Файл | Назначение |
+|------|------------|
+| `git-ssh-hosts.conf` | SSH-хосты и ключи |
+| `git-user.conf` | git user.name / email |
+| `kalinamall-gitea.conf` | API kalinamall |
+| `papatramp-gitea.conf` | API home Gitea |
@@ -0,0 +1,28 @@
+#Requires -Version 5.1
+<#
+.SYNOPSIS
+  Обёртка над Invoke-MachineBootstrap.ps1 (совместимость).
+#>
+[CmdletBinding()]
+param(
+    [string]$RulesDest = '',
+    [switch]$SkipClone,
+    [switch]$SkipProfile,
+    [switch]$WhatIf
+)
+
+$root = $PSScriptRoot
+if (-not $RulesDest) {
+    $RulesDest = Join-Path $HOME 'CursorRules'
+}
+
+& (Join-Path $root 'scripts\Invoke-MachineBootstrap.ps1') @{
+    Root        = $root
+    RulesDest   = $RulesDest
+    SkipClone   = $SkipClone.IsPresent
+    SkipProfile = $SkipProfile.IsPresent
+    WhatIf      = $WhatIf.IsPresent
+}
+
+Write-Host ''
+Write-Host '[+] Bootstrap complete. In a project run: init-cursor' -ForegroundColor Green
@@ -0,0 +1,13 @@
+#!/usr/bin/env bash
+# Обёртка над invoke-machine-bootstrap.sh (совместимость).
+set -euo pipefail
+
+ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+RULES_DEST="${RULES_DEST:-$HOME/CursorRules}"
+SKIP_CLONE="${SKIP_CLONE:-0}"
+SKIP_PROFILE="${SKIP_PROFILE:-0}"
+
+ROOT="$ROOT" RULES_DEST="$RULES_DEST" SKIP_CLONE="$SKIP_CLONE" SKIP_PROFILE="$SKIP_PROFILE" \
+  bash "$ROOT/scripts/invoke-machine-bootstrap.sh"
+
+printf '\n[+] Bootstrap complete. In a project run: init-cursor\n'
@@ -1,32 +1,93 @@
 #Requires -Version 5.1
 <#
 .SYNOPSIS
-  Копирует Cursor rules в текущий каталог и настраивает git remotes.
+  Инициализация Cursor в текущем проекте; на новом ПК сначала настраивает git/SSH.

 .DESCRIPTION
-  1. .cursorignore из $HOME\CursorRules
-  2. .cursor/rules/*.mdc
-  3. В git-репо: Set-GitRemotes.ps1 + Ensure-GiteaHomeRepo.ps1 (home Gitea)
+  Один вызов init-cursor:
+  - если машина не настроена: SSH, Gitea keys, clone Rules в $HOME\CursorRules
+  - затем копирует rules в текущий репозиторий и настраивает remotes
+
+  Первый запуск (приватный repo — через git clone, см. README):
+    git clone --depth 1 ssh://git@git.kalinamall.ru:2222/PapaTramp/Rules.git $HOME\CursorRules
+    & $HOME\CursorRules\install.ps1

 .EXAMPLE
  cd C:\Users\papat\Projects\MyRepo
  init-cursor
+  init-cursor -Update
 #>
-function init-cursor {
+function Get-CursorRulesDest {
+    return (Join-Path $HOME 'CursorRules')
+}
+
+function Get-CursorBootstrapRoot {
+    param([string]$RulesDest)
+
+    $scriptRoot = $PSScriptRoot
+    if (Test-Path (Join-Path $scriptRoot 'scripts\Invoke-MachineBootstrap.ps1')) {
+        return $scriptRoot
+    }
+    if (Test-Path (Join-Path $RulesDest 'local\git-ssh-hosts.conf')) {
+        return $RulesDest
+    }
+    if (Test-Path (Join-Path $scriptRoot 'local\git-ssh-hosts.conf')) {
+        return $scriptRoot
+    }
+    return $null
+}
+
+function Initialize-CursorRulesEnvironment {
+    [CmdletBinding()]
+    param(
+        [switch]$Update
+    )
+
+    $rulesDest = Get-CursorRulesDest
+    $bootstrapRoot = Get-CursorBootstrapRoot -RulesDest $rulesDest
+
+    if (-not $bootstrapRoot) {
+        Write-Host 'Error: CursorRules not found. Run install.ps1 from Gitea first:' -ForegroundColor Red
+        Write-Host '  git clone --depth 1 ssh://git@git.kalinamall.ru:2222/PapaTramp/Rules.git $HOME\CursorRules' -ForegroundColor Yellow
+        Write-Host '  & $HOME\CursorRules\install.ps1' -ForegroundColor Yellow
+        return $false
+    }
+
+    $bootstrapScript = Join-Path $bootstrapRoot 'scripts\Invoke-MachineBootstrap.ps1'
+    if (-not (Test-Path -LiteralPath $bootstrapScript)) {
+        Write-Host "Error: bootstrap script not found: $bootstrapScript" -ForegroundColor Red
+        return $false
+    }
+
+    $repoReady = Test-Path (Join-Path $rulesDest '.git')
+    $skipClone = $repoReady
+
+    & $bootstrapScript -Root $bootstrapRoot -RulesDest $rulesDest -SkipClone:$skipClone
+
+    if ($Update -and $repoReady) {
+        Write-Host '[*] Updating CursorRules from remote...' -ForegroundColor Cyan
+        git -C $rulesDest pull --ff-only
+        if ($LASTEXITCODE -ne 0) {
+            Write-Host '[!] git pull failed in CursorRules' -ForegroundColor Yellow
+        }
+        else {
+            Write-Host '[+] CursorRules updated' -ForegroundColor Green
+        }
+    }
+
+    return $true
+}
+
+function Install-CursorInCurrentProject {
    [CmdletBinding()]
    param(
        [switch]$SkipGitRemotes
    )

-    $source = Join-Path $HOME 'CursorRules'
+    $source = Get-CursorRulesDest
    $rulesSrc = Join-Path $source '.cursor\rules'
    $scripts = Join-Path $source 'scripts'

-    if (-not (Test-Path $source)) {
-        Write-Host "Error: $source not found" -ForegroundColor Red
-        return
-    }
-
    $cursorIgnore = Join-Path $source '.cursorignore'
    if (Test-Path $cursorIgnore) {
        Copy-Item $cursorIgnore . -Force
@@ -68,7 +129,7 @@ function init-cursor {

    git rev-parse --is-inside-work-tree 2>$null | Out-Null
    if ($LASTEXITCODE -ne 0) {
-        Write-Host '[!] Not a git repo — remotes skipped' -ForegroundColor Yellow
+        Write-Host '[!] Not a git repo - remotes skipped' -ForegroundColor Yellow
        return
    }

@@ -90,3 +151,22 @@ function init-cursor {
        }
    }
 }
+
+function init-cursor {
+    [CmdletBinding()]
+    param(
+        [switch]$SkipGitRemotes,
+        [switch]$Update
+    )
+
+    if (-not (Initialize-CursorRulesEnvironment -Update:$Update)) {
+        return
+    }
+
+    Install-CursorInCurrentProject -SkipGitRemotes:$SkipGitRemotes
+    Write-Host '[+] init-cursor complete' -ForegroundColor Green
+}
+
+if ($MyInvocation.InvocationName -eq '.') {
+    Write-Host '[+] init-cursor loaded - run: init-cursor' -ForegroundColor DarkCyan
+}
@@ -0,0 +1,142 @@
+#!/usr/bin/env bash
+# Инициализация Cursor в текущем проекте; на новом хосте сначала настраивает git/SSH.
+
+get_cursor_rules_dest() {
+  printf '%s' "$HOME/CursorRules"
+}
+
+get_cursor_bootstrap_root() {
+  local rules_dest script_dir
+  rules_dest="$(get_cursor_rules_dest)"
+  script_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+
+  if [[ -f "$script_dir/scripts/invoke-machine-bootstrap.sh" ]]; then
+    printf '%s' "$script_dir"
+    return 0
+  fi
+  if [[ -f "$rules_dest/local/git-ssh-hosts.conf" ]]; then
+    printf '%s' "$rules_dest"
+    return 0
+  fi
+  if [[ -f "$script_dir/local/git-ssh-hosts.conf" ]]; then
+    printf '%s' "$script_dir"
+    return 0
+  fi
+  return 1
+}
+
+initialize_cursor_rules_environment() {
+  local update=0
+  [[ "${1:-}" == '--update' ]] && update=1
+
+  local rules_dest bootstrap_root
+  rules_dest="$(get_cursor_rules_dest)"
+  bootstrap_root="$(get_cursor_bootstrap_root)" || {
+    echo 'Error: CursorRules not found. Run install.sh from Gitea first:' >&2
+    echo '  curl -fsSL https://git.kalinamall.ru/PapaTramp/Rules/raw/branch/main/install.sh | bash' >&2
+    return 1
+  }
+
+  local skip_clone=0
+  [[ -d "$rules_dest/.git" ]] && skip_clone=1
+
+  ROOT="$bootstrap_root" RULES_DEST="$rules_dest" SKIP_CLONE="$skip_clone" \
+    bash "$bootstrap_root/scripts/invoke-machine-bootstrap.sh"
+
+  if [[ "$update" -eq 1 && -d "$rules_dest/.git" ]]; then
+    echo '[*] Updating CursorRules from remote...'
+    if git -C "$rules_dest" pull --ff-only; then
+      echo '[+] CursorRules updated'
+    else
+      echo '[!] git pull failed in CursorRules' >&2
+    fi
+  fi
+}
+
+install_cursor_in_current_project() {
+  local skip_git_remotes=0
+  while [[ $# -gt 0 ]]; do
+    case "$1" in
+      --skip-git-remotes) skip_git_remotes=1; shift ;;
+      *) shift ;;
+    esac
+  done
+
+  local source rules_src scripts
+  source="$(get_cursor_rules_dest)"
+  rules_src="$source/.cursor/rules"
+  scripts="$source/scripts"
+
+  if [[ -f "$source/.cursorignore" ]]; then
+    cp -f "$source/.cursorignore" .
+    echo '[+] .cursorignore copied'
+  fi
+
+  if [[ -d "$rules_src" ]]; then
+    mkdir -p ./.cursor/rules
+    cp -f "$rules_src"/*.mdc ./.cursor/rules/
+    echo '[+] .cursor/rules (*.mdc) copied'
+  fi
+
+  if [[ -d .git ]]; then
+    local gitignore='.gitignore' line
+    for line in '.cursor/' '.cursorignore'; do
+      if [[ ! -f "$gitignore" ]]; then
+        printf '%s\n' "$line" > "$gitignore"
+        echo "[+] .gitignore created ($line)"
+      elif ! grep -Fxq "$line" "$gitignore" 2>/dev/null; then
+        printf '%s\n' "$line" >> "$gitignore"
+        echo "[+] .gitignore updated ($line)"
+      fi
+    done
+  fi
+
+  if [[ "$skip_git_remotes" -eq 1 ]]; then
+    echo '[!] Git remotes skipped'
+    return 0
+  fi
+
+  if ! git rev-parse --is-inside-work-tree >/dev/null 2>&1; then
+    echo '[!] Not a git repo - remotes skipped'
+    return 0
+  fi
+
+  if [[ -f "$scripts/Set-GitRemotes.sh" ]]; then
+    echo '[*] Configuring git remotes...'
+    bash "$scripts/Set-GitRemotes.sh" || true
+  fi
+
+  if [[ -f "$scripts/Ensure-GiteaHomeRepo.ps1" ]]; then
+    local repo_name
+    repo_name="$(basename "$(git rev-parse --show-toplevel)")"
+    echo "[*] Ensuring home Gitea repo: $repo_name"
+    if command -v pwsh >/dev/null 2>&1; then
+      pwsh -NoProfile -File "$scripts/Ensure-GiteaHomeRepo.ps1" -RepoName "$repo_name" || true
+    fi
+  fi
+}
+
+init-cursor() {
+  local update=0
+  local skip_git_remotes=0
+  while [[ $# -gt 0 ]]; do
+    case "$1" in
+      -Update|--update) update=1; shift ;;
+      -SkipGitRemotes|--skip-git-remotes) skip_git_remotes=1; shift ;;
+      *) shift ;;
+    esac
+  done
+
+  if [[ "$update" -eq 1 ]]; then
+    initialize_cursor_rules_environment --update || return 1
+  else
+    initialize_cursor_rules_environment || return 1
+  fi
+
+  if [[ "$skip_git_remotes" -eq 1 ]]; then
+    install_cursor_in_current_project --skip-git-remotes
+  else
+    install_cursor_in_current_project
+  fi
+  echo '[+] init-cursor complete'
+}
@@ -0,0 +1,65 @@
+#Requires -Version 5.1
+<#
+.SYNOPSIS
+  Точка входа на новом ПК: clone Rules, bootstrap, init-cursor в текущем проекте.
+
+.DESCRIPTION
+  SSH / HTTPS / ключи / remotes — автоматически. Запускать из каталога проекта.
+  На голом ПК: скопируйте этот файл с рабочей машины (scp/USB), затем:
+    & .\install.ps1
+
+.EXAMPLE
+  cd C:\path\to\your-repo
+  & $env:TEMP\install.ps1
+#>
+[CmdletBinding()]
+param(
+    [switch]$SkipGitRemotes,
+    [switch]$Update
+)
+
+Set-StrictMode -Version Latest
+$ErrorActionPreference = 'Stop'
+
+$rulesDest = Join-Path $HOME 'CursorRules'
+$httpsUrl = 'https://git.kalinamall.ru/PapaTramp/Rules.git'
+$sshUrl = 'ssh://git@git.kalinamall.ru:2222/PapaTramp/Rules.git'
+
+function Ensure-RulesClone {
+    if (Test-Path (Join-Path $rulesDest '.git')) {
+        Write-Host '[*] Updating CursorRules...' -ForegroundColor Cyan
+        git -C $rulesDest pull --ff-only
+        return
+    }
+
+    if (Test-Path -LiteralPath $rulesDest) {
+        $backup = "${rulesDest}.bak-$(Get-Date -Format 'yyyyMMdd-HHmmss')"
+        Write-Host "[!] Replacing non-git folder: $rulesDest -> $backup" -ForegroundColor Yellow
+        Move-Item -LiteralPath $rulesDest -Destination $backup
+    }
+
+    Write-Host '[*] Cloning Rules via SSH...' -ForegroundColor Cyan
+    git clone --depth 1 $sshUrl $rulesDest 2>&1 | Out-Null
+    if ($LASTEXITCODE -ne 0) {
+        Write-Host '[!] SSH clone failed - trying HTTPS (enter Gitea login once)...' -ForegroundColor Yellow
+        git clone --depth 1 $httpsUrl $rulesDest
+        if ($LASTEXITCODE -ne 0) {
+            throw 'git clone failed'
+        }
+    }
+    Write-Host "[+] Cloned to $rulesDest" -ForegroundColor Green
+}
+
+Ensure-RulesClone
+
+. (Join-Path $rulesDest 'init-cursor.ps1')
+
+if ($Update) {
+    init-cursor -Update -SkipGitRemotes:$SkipGitRemotes
+}
+elseif ($SkipGitRemotes) {
+    init-cursor -SkipGitRemotes
+}
+else {
+    init-cursor
+}
@@ -0,0 +1,62 @@
+#!/usr/bin/env bash
+# Первая загрузка Rules и init-cursor. SSH/HTTPS и bootstrap — автоматически.
+set -euo pipefail
+
+RULES_DEST="${RULES_DEST:-$HOME/CursorRules}"
+HTTPS_URL="${HTTPS_URL:-https://git.kalinamall.ru/PapaTramp/Rules.git}"
+SSH_URL="${SSH_URL:-ssh://git@git.kalinamall.ru:2222/PapaTramp/Rules.git}"
+SKIP_GIT_REMOTES=0
+UPDATE=0
+
+while [[ $# -gt 0 ]]; do
+  case "$1" in
+    --skip-git-remotes) SKIP_GIT_REMOTES=1; shift ;;
+    --update|-Update) UPDATE=1; shift ;;
+    *) shift ;;
+  esac
+done
+
+log_step() { printf '[*] %s\n' "$1"; }
+log_ok() { printf '[+] %s\n' "$1"; }
+log_warn() { printf '[!] %s\n' "$1"; }
+
+ensure_rules_clone() {
+  if [[ -d "$RULES_DEST/.git" ]]; then
+    log_step 'Updating CursorRules...'
+    git -C "$RULES_DEST" pull --ff-only
+    return 0
+  fi
+
+  if [[ -e "$RULES_DEST" ]]; then
+    local backup="${RULES_DEST}.bak-$(date +%Y%m%d-%H%M%S)"
+    log_warn "Replacing non-git folder: $RULES_DEST -> $backup"
+    mv "$RULES_DEST" "$backup"
+  fi
+
+  log_step 'Cloning Rules via SSH...'
+  if git clone --depth 1 "$SSH_URL" "$RULES_DEST" 2>/dev/null; then
+    log_ok "Cloned to $RULES_DEST"
+    return 0
+  fi
+
+  log_warn 'SSH clone failed - trying HTTPS (enter Gitea login once)...'
+  git clone --depth 1 "$HTTPS_URL" "$RULES_DEST"
+  log_ok "Cloned to $RULES_DEST"
+}
+
+ensure_rules_clone
+
+# shellcheck source=/dev/null
+source "$RULES_DEST/init-cursor.sh"
+
+if [[ "$UPDATE" -eq 1 ]]; then
+  if [[ "$SKIP_GIT_REMOTES" -eq 1 ]]; then
+    init-cursor --update --skip-git-remotes
+  else
+    init-cursor --update
+  fi
+elif [[ "$SKIP_GIT_REMOTES" -eq 1 ]]; then
+  init-cursor --skip-git-remotes
+else
+  init-cursor
+fi
@@ -0,0 +1,52 @@
+# Профили SSH-ключей и хосты Git. GiteaConfig — файл в local/ для регистрации pubkey через API.
+
+[profile:kalinamall-git]
+KeyName=id_ed25519_git_kalinamall
+KeyComment=papatramp@kalinamall
+GiteaConfig=kalinamall-gitea.conf
+
+[host:git.kalinamall.ru]
+HostName=192.168.160.129
+Port=2222
+User=git
+Profile=kalinamall-git
+
+[host:git.kalinamall.lan]
+HostName=192.168.160.129
+Port=2222
+User=git
+Profile=kalinamall-git
+
+[profile:papatramp-git]
+KeyName=id_ed25519_git_papatramp
+KeyComment=papatramp@papatramp.ru
+GiteaConfig=papatramp-gitea.conf
+
+[host:git.papatramp.ru]
+HostName=192.168.128.48
+Port=2222
+User=git
+Profile=papatramp-git
+
+[host:git.papatramp.lan]
+HostName=192.168.128.48
+Port=2222
+User=git
+Profile=papatramp-git
+
+[host:git.papatramp-haproxy]
+HostName=192.168.128.65
+Port=2222
+User=git
+Profile=papatramp-git
+
+[profile:github]
+KeyName=id_ed25519_github
+KeyComment=papatramp@gmail.com
+GiteaConfig=
+
+[host:github.com]
+HostName=github.com
+Port=22
+User=git
+Profile=github
@@ -0,0 +1,2 @@
+UserName=PTah
+UserEmail=papatramp@gmail.com
@@ -0,0 +1,9 @@
+Type=gitea
+GiteaHost=git.kalinamall.ru
+GiteaPort=2222
+GiteaWebUrl=https://git.kalinamall.ru
+GiteaApiUrl=http://192.168.160.129:3000
+GiteaApiUser=papatramp
+GiteaApiPassword=R3tt3tnatur
+KeyName=id_ed25519_git_kalinamall
+KeyComment=papatramp@kalinamall
@@ -0,0 +1,210 @@
+#Requires -Version 5.1
+<#
+.SYNOPSIS
+  Настройка git на машине: user, SSH, Gitea keys, clone/update Rules.
+#>
+[CmdletBinding()]
+param(
+    [Parameter(Mandatory = $true)][string]$Root,
+    [string]$RulesDest = '',
+    [string]$CloneUrl = 'ssh://git@git.kalinamall.ru:2222/PapaTramp/Rules.git',
+    [string]$HttpsCloneUrl = 'https://git.kalinamall.ru/PapaTramp/Rules.git',
+    [switch]$SkipClone,
+    [switch]$SkipProfile,
+    [switch]$SkipGitSetup,
+    [switch]$WhatIf
+)
+
+Set-StrictMode -Version Latest
+$ErrorActionPreference = 'Stop'
+
+function Write-Step([string]$Message) { Write-Host "[*] $Message" -ForegroundColor Cyan }
+function Write-Ok([string]$Message) { Write-Host "[+] $Message" -ForegroundColor Green }
+function Write-Warn([string]$Message) { Write-Host "[!] $Message" -ForegroundColor Yellow }
+
+function Read-KeyValueFile {
+    param([string]$Path)
+    $data = @{}
+    if (-not (Test-Path -LiteralPath $Path)) { return $data }
+    Get-Content -LiteralPath $Path | ForEach-Object {
+        if ($_ -match '^([^#=]+)=(.*)$') {
+            $data[$Matches[1].Trim()] = $Matches[2].Trim()
+        }
+    }
+    return $data
+}
+
+function Test-MachineGitReady {
+    param([string]$ConfigDir)
+
+    $hostsConfig = Join-Path $ConfigDir 'git-ssh-hosts.conf'
+    if (-not (Test-Path -LiteralPath $hostsConfig)) { return $false }
+
+    $sshConfig = Join-Path $HOME '.ssh\config'
+    if (-not (Test-Path -LiteralPath $sshConfig)) { return $false }
+
+    $profiles = @{}
+    $currentProfile = $null
+    Get-Content -LiteralPath $hostsConfig | ForEach-Object {
+        $line = $_.Trim()
+        if ($line -match '^\[profile:(.+)\]$') {
+            $currentProfile = $Matches[1]
+            $profiles[$currentProfile] = @{}
+            return
+        }
+        if ($line -match '^\[host:') { $currentProfile = $null; return }
+        if ($line -match '^([^=]+)=(.*)$' -and $currentProfile) {
+            $profiles[$currentProfile][$Matches[1].Trim()] = $Matches[2].Trim()
+        }
+    }
+
+    $sshText = Get-Content -LiteralPath $sshConfig -Raw
+    foreach ($profile in $profiles.Values) {
+        $keyName = $profile.KeyName
+        if (-not $keyName) { continue }
+        $keyPath = Join-Path $HOME ".ssh\$keyName"
+        if (-not (Test-Path -LiteralPath $keyPath)) { return $false }
+    }
+
+    if ($sshText -notmatch '(?m)^Host\s+git\.kalinamall\.ru\s*$') { return $false }
+    return $true
+}
+
+function Ensure-RulesRepository {
+    param(
+        [string]$Destination,
+        [string]$SshUrl,
+        [string]$HttpsUrl
+    )
+
+    if (Test-Path -LiteralPath $Destination) {
+        if (Test-Path (Join-Path $Destination '.git')) {
+            if ($WhatIf) {
+                Write-Step "WhatIf: git pull $Destination"
+                return
+            }
+            Write-Step "Updating $Destination"
+            git -C $Destination pull --ff-only
+            Write-Ok 'CursorRules updated'
+            return
+        }
+
+        $backup = "${Destination}.bak-$(Get-Date -Format 'yyyyMMdd-HHmmss')"
+        Write-Warn "Replacing non-git folder: $Destination -> $backup"
+        if (-not $WhatIf) {
+            Move-Item -LiteralPath $Destination -Destination $backup
+        }
+    }
+
+    if ($WhatIf) {
+        Write-Step "WhatIf: clone -> $Destination"
+        return
+    }
+
+    Write-Step "Cloning Rules via SSH: $SshUrl"
+    git clone --depth 1 $SshUrl $Destination 2>&1 | Out-Null
+    if ($LASTEXITCODE -eq 0) {
+        Write-Ok "Cloned to $Destination"
+        return
+    }
+
+    Write-Warn 'SSH clone failed - trying HTTPS (enter Gitea login once)'
+    git clone --depth 1 $HttpsUrl $Destination
+    if ($LASTEXITCODE -ne 0) {
+        throw "Failed to clone Rules repository"
+    }
+    Write-Ok "Cloned via HTTPS to $Destination"
+}
+
+function Ensure-InitCursorProfile {
+    param([string]$RulesDest)
+
+    $profileHook = ". `"$RulesDest\init-cursor.ps1`""
+    $profilePath = $PROFILE.CurrentUserAllHosts
+    if (-not $profilePath) { $profilePath = $PROFILE.CurrentUserCurrentHost }
+
+    if ($WhatIf) {
+        Write-Step "WhatIf: profile hook -> $profilePath"
+        return
+    }
+
+    $profileDir = Split-Path -Parent $profilePath
+    if (-not (Test-Path -LiteralPath $profileDir)) {
+        New-Item -ItemType Directory -Path $profileDir -Force | Out-Null
+    }
+
+    $profileText = if (Test-Path -LiteralPath $profilePath) {
+        Get-Content -LiteralPath $profilePath -Raw
+    } else {
+        ''
+    }
+
+    if ($profileText -notmatch [regex]::Escape($profileHook)) {
+        if ($profileText -and -not $profileText.EndsWith("`n")) { $profileText += "`n" }
+        $profileText += $profileHook + "`n"
+        Set-Content -LiteralPath $profilePath -Value $profileText.TrimEnd() -Encoding UTF8
+        Write-Ok "Profile updated: $profilePath"
+    }
+}
+
+if (-not $RulesDest) {
+    $RulesDest = Join-Path $HOME 'CursorRules'
+}
+
+$configDir = Join-Path $Root 'local'
+if (-not (Test-Path -LiteralPath $configDir)) {
+    throw "Bootstrap config not found: $configDir"
+}
+
+$gitReady = Test-MachineGitReady -ConfigDir $configDir
+$repoReady = Test-Path (Join-Path $RulesDest '.git')
+
+if (-not $gitReady -and -not $SkipGitSetup) {
+    Write-Step 'Machine bootstrap: git + SSH'
+
+$userCfgPath = Join-Path $configDir 'git-user.conf'
+if (Test-Path -LiteralPath $userCfgPath) {
+    $userCfg = Read-KeyValueFile -Path $userCfgPath
+    if ($userCfg.UserName -and -not $WhatIf) {
+        git config --global user.name $userCfg.UserName | Out-Null
+        Write-Ok "git user.name = $($userCfg.UserName)"
+    }
+    if ($userCfg.UserEmail -and -not $WhatIf) {
+        git config --global user.email $userCfg.UserEmail | Out-Null
+        Write-Ok "git user.email = $($userCfg.UserEmail)"
+    }
+}
+
+$setupArgs = @{ ConfigDir = $configDir; WhatIf = $WhatIf.IsPresent }
+& (Join-Path $Root 'scripts\Setup-GitSsh.ps1') @setupArgs
+
+$registerArgs = @{ ConfigDir = $configDir; WhatIf = $WhatIf.IsPresent }
+& (Join-Path $Root 'scripts\Register-GiteaSshKeys.ps1') @registerArgs
+
+if (-not $WhatIf) {
+    Write-Step 'Testing git@git.kalinamall.ru'
+    ssh -T -o BatchMode=yes -o ConnectTimeout=10 git@git.kalinamall.ru 2>&1 | ForEach-Object { Write-Host $_ }
+}
+}
+elseif ($gitReady) {
+    Write-Ok 'Git SSH already configured'
+}
+
+if (-not $SkipClone -and -not $repoReady) {
+    Ensure-RulesRepository -Destination $RulesDest -SshUrl $CloneUrl -HttpsUrl $HttpsCloneUrl
+}
+elseif ($repoReady -and -not $SkipClone -and -not $WhatIf) {
+    Write-Ok "CursorRules repo OK: $RulesDest"
+}
+
+if (-not $SkipProfile) {
+    Ensure-InitCursorProfile -RulesDest $RulesDest
+}
+
+Write-Ok 'Machine bootstrap complete'
+
+# Export test function for init-cursor dot-source
+function Test-CursorMachineGitReady {
+    param([string]$ConfigDir = (Join-Path $HOME 'CursorRules\local'))
+    return Test-MachineGitReady -ConfigDir $ConfigDir
+}
@@ -0,0 +1,136 @@
+#Requires -Version 5.1
+<#
+.SYNOPSIS
+  Регистрирует публичные SSH-ключи в Gitea через API (kalinamall, papatramp).
+#>
+[CmdletBinding()]
+param(
+    [string]$ConfigDir = "$HOME\CursorRules\local",
+    [string]$HostsConfig = '',
+    [switch]$WhatIf
+)
+
+Set-StrictMode -Version Latest
+$ErrorActionPreference = 'Stop'
+
+function Write-Step([string]$Message) { Write-Host "[*] $Message" -ForegroundColor Cyan }
+function Write-Ok([string]$Message) { Write-Host "[+] $Message" -ForegroundColor Green }
+function Write-Warn([string]$Message) { Write-Host "[!] $Message" -ForegroundColor Yellow }
+
+function Read-KeyValueFile {
+    param([string]$Path)
+    $data = @{}
+    Get-Content -LiteralPath $Path | ForEach-Object {
+        if ($_ -match '^([^#=]+)=(.*)$') {
+            $data[$Matches[1].Trim()] = $Matches[2].Trim()
+        }
+    }
+    return $data
+}
+
+function Read-GitSshHostsConfig {
+    param([string]$Path)
+
+    $profiles = @{}
+    $currentProfile = $null
+
+    Get-Content -LiteralPath $Path | ForEach-Object {
+        $line = $_.Trim()
+        if (-not $line -or $line.StartsWith('#')) { return }
+        if ($line -match '^\[profile:(.+)\]$') {
+            $currentProfile = $Matches[1]
+            $profiles[$currentProfile] = @{}
+            return
+        }
+        if ($line -match '^\[host:') { $currentProfile = $null; return }
+        if ($line -match '^([^=]+)=(.*)$' -and $currentProfile) {
+            $profiles[$currentProfile][$Matches[1].Trim()] = $Matches[2].Trim()
+        }
+    }
+
+    return $profiles
+}
+
+function Get-GiteaAuthHeader {
+    param([hashtable]$Cfg)
+    $pair = '{0}:{1}' -f $Cfg.GiteaApiUser, $Cfg.GiteaApiPassword
+    $auth = 'Basic ' + [Convert]::ToBase64String([Text.Encoding]::ASCII.GetBytes($pair))
+    return @{ Authorization = $auth; 'Content-Type' = 'application/json' }
+}
+
+function Register-GiteaKey {
+    param(
+        [hashtable]$Cfg,
+        [string]$PublicKeyPath,
+        [string]$Title
+    )
+
+    if (-not $Cfg.GiteaApiPassword) {
+        Write-Warn "$Title : GiteaApiPassword empty - add key manually in Gitea UI"
+        Write-Host (Get-Content -LiteralPath $PublicKeyPath -Raw).Trim()
+        return
+    }
+
+    $base = $Cfg.GiteaApiUrl.TrimEnd('/')
+    $headers = Get-GiteaAuthHeader -Cfg $Cfg
+    $pub = (Get-Content -LiteralPath $PublicKeyPath -Raw).Trim()
+
+    $existing = Invoke-RestMethod -Method Get -Uri "$base/api/v1/user/keys" -Headers $headers -TimeoutSec 15
+    foreach ($item in @($existing)) {
+        if ($item.key.Trim() -eq $pub) {
+            Write-Ok "$Title : key already registered ($($item.title))"
+            return
+        }
+    }
+
+    $body = (@{ title = $Title; key = $pub } | ConvertTo-Json)
+    if ($WhatIf) {
+        Write-Step "WhatIf: POST $base/api/v1/user/keys ($Title)"
+        return
+    }
+
+    $created = Invoke-RestMethod -Method Post -Uri "$base/api/v1/user/keys" -Headers $headers -Body $body -TimeoutSec 30
+    Write-Ok "$Title : registered ($($created.title))"
+}
+
+if (-not $HostsConfig) {
+    $HostsConfig = Join-Path $ConfigDir 'git-ssh-hosts.conf'
+}
+if (-not (Test-Path -LiteralPath $HostsConfig)) {
+    throw "Config not found: $HostsConfig"
+}
+
+$profiles = Read-GitSshHostsConfig -Path $HostsConfig
+$sshDir = Join-Path $HOME '.ssh'
+$machine = $env:COMPUTERNAME
+if (-not $machine) { $machine = [Environment]::MachineName }
+$registered = @{}
+
+foreach ($profileName in $profiles.Keys) {
+    $profile = $profiles[$profileName]
+    $giteaConfigName = $profile.GiteaConfig
+    if (-not $giteaConfigName) { continue }
+
+    $keyName = $profile.KeyName
+    if ($registered.ContainsKey($keyName)) { continue }
+    $registered[$keyName] = $true
+
+    $giteaPath = Join-Path $ConfigDir $giteaConfigName
+    if (-not (Test-Path -LiteralPath $giteaPath)) {
+        Write-Warn "Gitea config not found: $giteaPath"
+        continue
+    }
+
+    $cfg = Read-KeyValueFile -Path $giteaPath
+    $pubPath = Join-Path $sshDir "$keyName.pub"
+    if (-not (Test-Path -LiteralPath $pubPath)) {
+        Write-Warn "Public key not found: $pubPath (run Setup-GitSsh first)"
+        continue
+    }
+
+    $title = "$machine-$keyName"
+    Write-Step "Registering $keyName on $($cfg.GiteaHost)"
+    Register-GiteaKey -Cfg $cfg -PublicKeyPath $pubPath -Title $title
+}
+
+Write-Ok 'Gitea SSH key registration done'
@@ -1,7 +1,7 @@
 #Requires -Version 5.1
 <#
 .SYNOPSIS
-  Стандартные git remote: home, kalinamall, github.
+  Стандартные git remote: home (papatramp), kalinamall, github (PTah).

 .EXAMPLE
  cd C:\Users\papat\Projects\MyRepo
@@ -29,19 +29,46 @@ function Test-GitRepo {
    }
 }

+function Get-RepoNameFromRemoteUrl {
+    param([string]$Url)
+    if ($Url -match '/([^/]+?)(?:\.git)?/?$') {
+        return $Matches[1]
+    }
+    return $null
+}
+
 function Get-RepoName {
    param([string]$Name)
    if ($Name) { return $Name }
+
+    foreach ($remote in @('kalinamall', 'home', 'github', 'origin')) {
+        $url = git remote get-url $remote 2>$null
+        if ($url) {
+            $fromUrl = Get-RepoNameFromRemoteUrl -Url $url.Trim()
+            if ($fromUrl) { return $fromUrl }
+        }
+    }
+
    return (Split-Path -Leaf (git rev-parse --show-toplevel))
 }

+function Get-OriginRemoteTarget {
+    $url = (git remote get-url origin 2>$null)
+    if (-not $url) { return $null }
+    $lower = $url.ToLower()
+    if ($lower -match 'kalinamall') { return 'kalinamall' }
+    if ($lower -match 'papatramp') { return 'home' }
+    if ($lower -match 'github\.com') { return 'github' }
+    return $null
+}
+
 function Set-Remote {
    param(
        [string]$Name,
        [string]$Url
    )

-    $existing = git remote 2>$null
+    $existing = @(git remote 2>$null)
    $has = $existing -contains $Name

    if ($WhatIf) {
@@ -60,9 +87,19 @@ function Set-Remote {
        return
    }

+    if ($existing -contains 'origin') {
+        $originTarget = Get-OriginRemoteTarget
+        if ($originTarget -eq $Name) {
+            git remote rename origin $Name
+            git remote set-url $Name $Url
+            Write-Ok "remote origin renamed to $Name -> $Url"
+            return
+        }
+    }
+
    $legacy = @{
        home       = @('gitea', 'papatramp', 'origin-home')
-        github     = @('origin')
+        github     = @()
        kalinamall = @('gitea-kalinamall', 'kalina')
    }
    foreach ($old in $legacy[$Name]) {
@@ -81,16 +118,14 @@ function Set-Remote {
 Test-GitRepo
 $repoName = Get-RepoName -Name $Repo

-$homeUrl = "ssh://git@git.papatramp.lan:2222/${Owner}/${repoName}.git"
-$kalinamallUrl = "ssh://git@git.kalinamall.lan:2222/${Owner}/${repoName}.git"
+$homeUrl = "ssh://git@git.papatramp.ru:2222/${Owner}/${repoName}.git"
+$kalinamallUrl = "ssh://git@git.kalinamall.ru:2222/${Owner}/${repoName}.git"
 $githubUrl = "git@github.com:${GithubOrg}/${repoName}.git"

 Write-Step "Repo: $repoName"
 Set-Remote -Name 'home' -Url $homeUrl
+Set-Remote -Name 'kalinamall' -Url $kalinamallUrl
 Set-Remote -Name 'github' -Url $githubUrl
-if (-not $SkipKalinamall) {
-    Set-Remote -Name 'kalinamall' -Url $kalinamallUrl
-}

 Write-Host ''
 Write-Host 'Remotes:' -ForegroundColor Magenta
@@ -0,0 +1,105 @@
+#!/usr/bin/env bash
+# Стандартные git remote: home (papatramp), kalinamall, github (PTah).
+set -euo pipefail
+
+OWNER="${OWNER:-PapaTramp}"
+GITHUB_ORG="${GITHUB_ORG:-PTah}"
+REPO="${REPO:-}"
+WHAT_IF="${WHAT_IF:-0}"
+
+log_step() { printf '[*] %s\n' "$1"; }
+log_ok() { printf '[+] %s\n' "$1"; }
+
+if ! git rev-parse --is-inside-work-tree >/dev/null 2>&1; then
+  echo 'Run inside a git repository or set REPO.' >&2
+  exit 1
+fi
+
+repo_name_from_url() {
+  local url="$1"
+  if [[ "$url" =~ /([^/]+)(\.git)?/?$ ]]; then
+    echo "${BASH_REMATCH[1]}"
+  fi
+}
+
+repo_name="${REPO:-}"
+if [[ -z "$repo_name" ]]; then
+  for remote in kalinamall home github origin; do
+    if url="$(git remote get-url "$remote" 2>/dev/null)"; then
+      repo_name="$(repo_name_from_url "$url")"
+      [[ -n "$repo_name" ]] && break
+    fi
+  done
+fi
+repo_name="${repo_name:-$(basename "$(git rev-parse --show-toplevel)")}"
+home_url="ssh://git@git.papatramp.ru:2222/${OWNER}/${repo_name}.git"
+kalinamall_url="ssh://git@git.kalinamall.ru:2222/${OWNER}/${repo_name}.git"
+github_url="git@github.com:${GITHUB_ORG}/${repo_name}.git"
+
+origin_remote_target() {
+  local url
+  url="$(git remote get-url origin 2>/dev/null | tr '[:upper:]' '[:lower:]' || true)"
+  [[ -z "$url" ]] && return 0
+  if [[ "$url" == *kalinamall* ]]; then echo kalinamall; return 0; fi
+  if [[ "$url" == *papatramp* ]]; then echo home; return 0; fi
+  if [[ "$url" == *github.com* ]]; then echo github; return 0; fi
+}
+
+set_remote() {
+  local name="$1"
+  local url="$2"
+  local existing current old origin_target
+
+  if [[ "$WHAT_IF" == '1' ]]; then
+    log_step "WhatIf: remote $name -> $url"
+    return 0
+  fi
+
+  if git remote | grep -Fxq "$name"; then
+    current="$(git remote get-url "$name" | tr -d '\r\n')"
+    if [[ "$current" == "$url" ]]; then
+      log_ok "remote $name OK"
+      return 0
+    fi
+    git remote set-url "$name" "$url"
+    log_ok "remote $name updated -> $url"
+    return 0
+  fi
+
+  if git remote | grep -Fxq origin; then
+    origin_target="$(origin_remote_target || true)"
+    if [[ "$origin_target" == "$name" ]]; then
+      git remote rename origin "$name"
+      git remote set-url "$name" "$url"
+      log_ok "remote origin renamed to $name -> $url"
+      return 0
+    fi
+  fi
+
+  case "$name" in
+    home) legacy=(gitea papatramp origin-home) ;;
+    github) legacy=() ;;
+    kalinamall) legacy=(gitea-kalinamall kalina) ;;
+    *) legacy=() ;;
+  esac
+
+  for old in "${legacy[@]}"; do
+    if git remote | grep -Fxq "$old"; then
+      git remote rename "$old" "$name"
+      git remote set-url "$name" "$url"
+      log_ok "remote $old renamed to $name -> $url"
+      return 0
+    fi
+  done
+
+  git remote add "$name" "$url"
+  log_ok "remote $name added -> $url"
+}
+
+log_step "Repo: $repo_name"
+set_remote home "$home_url"
+set_remote kalinamall "$kalinamall_url"
+set_remote github "$github_url"
+
+printf '\n'
+git remote -v
@@ -0,0 +1,192 @@
+#Requires -Version 5.1
+<#
+.SYNOPSIS
+  Генерирует SSH-ключи и ~/.ssh/config для Git-хостов из local/git-ssh-hosts.conf.
+#>
+[CmdletBinding()]
+param(
+    [string]$ConfigDir = "$HOME\CursorRules\local",
+    [string]$HostsConfig = '',
+    [switch]$WhatIf
+)
+
+Set-StrictMode -Version Latest
+$ErrorActionPreference = 'Stop'
+
+function Write-Step([string]$Message) { Write-Host "[*] $Message" -ForegroundColor Cyan }
+function Write-Ok([string]$Message) { Write-Host "[+] $Message" -ForegroundColor Green }
+function Write-Warn([string]$Message) { Write-Host "[!] $Message" -ForegroundColor Yellow }
+
+function Read-KeyValueFile {
+    param([string]$Path)
+    $data = @{}
+    if (-not (Test-Path -LiteralPath $Path)) { return $data }
+    Get-Content -LiteralPath $Path | ForEach-Object {
+        if ($_ -match '^([^#=]+)=(.*)$') {
+            $data[$Matches[1].Trim()] = $Matches[2].Trim()
+        }
+    }
+    return $data
+}
+
+function Read-GitSshHostsConfig {
+    param([string]$Path)
+
+    $profiles = @{}
+    $hosts = @{}
+    $currentProfile = $null
+    $currentHost = $null
+
+    Get-Content -LiteralPath $Path | ForEach-Object {
+        $line = $_.Trim()
+        if (-not $line -or $line.StartsWith('#')) { return }
+
+        if ($line -match '^\[profile:(.+)\]$') {
+            $currentProfile = $Matches[1]
+            $currentHost = $null
+            $profiles[$currentProfile] = @{}
+            return
+        }
+        if ($line -match '^\[host:(.+)\]$') {
+            $currentHost = $Matches[1]
+            $currentProfile = $null
+            $hosts[$currentHost] = @{ Name = $currentHost }
+            return
+        }
+        if ($line -match '^([^=]+)=(.*)$') {
+            $key = $Matches[1].Trim()
+            $value = $Matches[2].Trim()
+            if ($currentHost) { $hosts[$currentHost][$key] = $value }
+            elseif ($currentProfile) { $profiles[$currentProfile][$key] = $value }
+        }
+    }
+
+    return @{ Profiles = $profiles; Hosts = $hosts }
+}
+
+function Get-SshConfigBlock {
+    param(
+        [string]$HostAlias,
+        [hashtable]$HostEntry,
+        [string]$IdentityFile
+    )
+
+    @(
+        "# BEGIN Setup-SshAccess:$HostAlias"
+        "Host $HostAlias"
+        "    HostName $($HostEntry.HostName)"
+        "    User $($HostEntry.User)"
+        "    Port $($HostEntry.Port)"
+        "    IdentityFile $IdentityFile"
+        "    IdentitiesOnly yes"
+        "    AddKeysToAgent yes"
+        "    StrictHostKeyChecking accept-new"
+        "# END Setup-SshAccess:$HostAlias"
+    ) -join "`n"
+}
+
+function Update-SshConfigText {
+    param(
+        [string]$ExistingText,
+        [string]$HostAlias,
+        [string]$Block
+    )
+
+    $begin = "# BEGIN Setup-SshAccess:$HostAlias"
+    $end = "# END Setup-SshAccess:$HostAlias"
+    $existing = $ExistingText
+
+    $pattern = "(?ms)^$([regex]::Escape($begin)).*?$([regex]::Escape($end))\r?\n?"
+    if ($existing -match $pattern) {
+        return ($existing -replace $pattern, ($Block + "`n"))
+    }
+
+    if ($existing -and -not $existing.EndsWith("`n")) {
+        $existing += "`n"
+    }
+    return $existing + $Block + "`n"
+}
+
+if (-not $HostsConfig) {
+    $HostsConfig = Join-Path $ConfigDir 'git-ssh-hosts.conf'
+}
+if (-not (Test-Path -LiteralPath $HostsConfig)) {
+    throw "Config not found: $HostsConfig"
+}
+
+$parsed = Read-GitSshHostsConfig -Path $HostsConfig
+$sshDir = Join-Path $HOME '.ssh'
+$sshConfigPath = Join-Path $sshDir 'config'
+
+if (-not $WhatIf) {
+    New-Item -ItemType Directory -Path $sshDir -Force | Out-Null
+}
+
+$configText = if (Test-Path -LiteralPath $sshConfigPath) {
+    Get-Content -LiteralPath $sshConfigPath -Raw
+} else {
+    ''
+}
+
+$profileKeys = @{}
+foreach ($profileName in $parsed.Profiles.Keys) {
+    $profile = $parsed.Profiles[$profileName]
+    $keyName = $profile.KeyName
+    if (-not $keyName -or $profileKeys.ContainsKey($keyName)) { continue }
+
+    $keyPath = Join-Path $sshDir $keyName
+  $comment = if ($profile.KeyComment) { $profile.KeyComment } else { $keyName }
+
+    if (-not (Test-Path -LiteralPath $keyPath)) {
+        Write-Step "Generating $keyName"
+        if ($WhatIf) {
+            Write-Warn "WhatIf: ssh-keygen -t ed25519 -f $keyPath"
+        }
+        else {
+            & ssh-keygen -t ed25519 -f $keyPath -N '""' -C $comment -q
+            Write-Ok "key $keyName created"
+        }
+    }
+    else {
+        Write-Ok "key $keyName exists"
+    }
+
+    $profileKeys[$keyName] = $profile
+}
+
+foreach ($hostAlias in ($parsed.Hosts.Keys | Sort-Object)) {
+    $hostEntry = $parsed.Hosts[$hostAlias]
+    $profileName = $hostEntry.Profile
+    if (-not $profileName -or -not $parsed.Profiles.ContainsKey($profileName)) {
+        throw "Host ${hostAlias}: unknown profile $profileName"
+    }
+
+    $profile = $parsed.Profiles[$profileName]
+    $identity = "~/.ssh/$($profile.KeyName)"
+    $block = Get-SshConfigBlock -HostAlias $hostAlias -HostEntry $hostEntry -IdentityFile $identity
+
+    if ($WhatIf) {
+        Write-Step "WhatIf: ssh config block for $hostAlias"
+        continue
+    }
+
+    $configText = Update-SshConfigText -ExistingText $configText -HostAlias $hostAlias -Block $block
+    Write-Ok "ssh config: $hostAlias"
+}
+
+if (-not $WhatIf) {
+    $utf8NoBom = New-Object System.Text.UTF8Encoding $false
+    [System.IO.File]::WriteAllText($sshConfigPath, $configText.TrimEnd() + "`n", $utf8NoBom)
+
+    Get-Service ssh-agent -ErrorAction SilentlyContinue | Where-Object { $_.Status -ne 'Running' } |
+        ForEach-Object { Start-Service ssh-agent -ErrorAction SilentlyContinue | Out-Null }
+
+    foreach ($keyName in $profileKeys.Keys) {
+        $keyPath = Join-Path $sshDir $keyName
+        if (Test-Path -LiteralPath $keyPath) {
+            try { ssh-add $keyPath 2>$null | Out-Null } catch { }
+        }
+    }
+}
+
+Write-Ok 'SSH setup complete'
@@ -0,0 +1,128 @@
+#!/usr/bin/env bash
+# Настройка git на машине: user, SSH, Gitea keys, clone/update Rules.
+set -euo pipefail
+
+ROOT="${ROOT:?ROOT is required}"
+RULES_DEST="${RULES_DEST:-$HOME/CursorRules}"
+CLONE_URL="${CLONE_URL:-ssh://git@git.kalinamall.ru:2222/PapaTramp/Rules.git}"
+HTTPS_CLONE_URL="${HTTPS_CLONE_URL:-https://git.kalinamall.ru/PapaTramp/Rules.git}"
+SKIP_CLONE="${SKIP_CLONE:-0}"
+SKIP_PROFILE="${SKIP_PROFILE:-0}"
+SKIP_GIT_SETUP="${SKIP_GIT_SETUP:-0}"
+WHAT_IF="${WHAT_IF:-0}"
+
+log_step() { printf '[*] %s\n' "$1"; }
+log_ok() { printf '[+] %s\n' "$1"; }
+log_warn() { printf '[!] %s\n' "$1"; }
+
+CONFIG_DIR="$ROOT/local"
+[[ -d "$CONFIG_DIR" ]] || { echo "Bootstrap config not found: $CONFIG_DIR" >&2; exit 1; }
+
+test_machine_git_ready() {
+  local hosts_config="$CONFIG_DIR/git-ssh-hosts.conf"
+  local ssh_config="$HOME/.ssh/config"
+  [[ -f "$hosts_config" && -f "$ssh_config" ]] || return 1
+  grep -q '^Host git.kalinamall.ru$' "$ssh_config" || return 1
+
+  local line current_profile='' key_name
+  while IFS= read -r line || [[ -n "$line" ]]; do
+    line="${line%%#*}"
+    line="${line%"${line##*[![:space:]]}"}"
+    [[ -z "$line" ]] && continue
+    if [[ "$line" =~ ^\[profile:(.+)\]$ ]]; then
+      current_profile="${BASH_REMATCH[1]}"
+      continue
+    fi
+    if [[ "$line" =~ ^\[host: ]]; then
+      current_profile=''
+      continue
+    fi
+    if [[ "$line" == KeyName=* && -n "$current_profile" ]]; then
+      key_name="${line#KeyName=}"
+      [[ -f "$HOME/.ssh/$key_name" ]] || return 1
+    fi
+  done < "$hosts_config"
+  return 0
+}
+
+ensure_rules_repository() {
+  if [[ -d "$RULES_DEST/.git" ]]; then
+    return 0
+  fi
+
+  if [[ -e "$RULES_DEST" ]]; then
+    local backup="${RULES_DEST}.bak-$(date +%Y%m%d-%H%M%S)"
+    log_warn "Replacing non-git folder: $RULES_DEST -> $backup"
+    if [[ "$WHAT_IF" != '1' ]]; then
+      mv "$RULES_DEST" "$backup"
+    fi
+  fi
+
+  log_step "Cloning Rules via SSH: $CLONE_URL"
+  if [[ "$WHAT_IF" == '1' ]]; then
+    log_step "WhatIf: clone -> $RULES_DEST"
+    return 0
+  fi
+  if git clone --depth 1 "$CLONE_URL" "$RULES_DEST" 2>/dev/null; then
+    log_ok "Cloned to $RULES_DEST"
+    return 0
+  fi
+
+  log_warn 'SSH clone failed - trying HTTPS (enter Gitea login once)'
+  git clone --depth 1 "$HTTPS_CLONE_URL" "$RULES_DEST"
+  log_ok "Cloned via HTTPS to $RULES_DEST"
+}
+
+ensure_init_cursor_profile() {
+  local hook="source \"$RULES_DEST/init-cursor.sh\""
+  local profile
+  for profile in "$HOME/.bashrc" "$HOME/.zshrc"; do
+    [[ -f "$profile" ]] || continue
+    if [[ "$WHAT_IF" == '1' ]]; then
+      log_step "WhatIf: profile hook -> $profile"
+      continue
+    fi
+    if ! grep -Fq "$hook" "$profile" 2>/dev/null; then
+      printf '\n%s\n' "$hook" >> "$profile"
+      log_ok "Profile updated: $profile"
+    fi
+  done
+}
+
+git_ready=0
+repo_ready=0
+test_machine_git_ready && git_ready=1
+[[ -d "$RULES_DEST/.git" ]] && repo_ready=1
+
+if [[ "$git_ready" -eq 0 && "$SKIP_GIT_SETUP" != '1' ]]; then
+  log_step 'Machine bootstrap: git + SSH'
+  if [[ -f "$CONFIG_DIR/git-user.conf" ]]; then
+    while IFS= read -r kv; do
+      key="${kv%%=*}"
+      value="${kv#*=}"
+      case "$key" in
+        UserName) git config --global user.name "$value"; log_ok "git user.name = $value" ;;
+        UserEmail) git config --global user.email "$value"; log_ok "git user.email = $value" ;;
+      esac
+    done < <(grep -v '^#' "$CONFIG_DIR/git-user.conf" | grep '=' || true)
+  fi
+  export CONFIG_DIR WHAT_IF
+  bash "$ROOT/scripts/setup-git-ssh.sh"
+  bash "$ROOT/scripts/register-gitea-ssh-keys.sh"
+  log_step 'Testing git@git.kalinamall.ru'
+  ssh -T -o BatchMode=yes -o ConnectTimeout=10 git@git.kalinamall.ru || true
+elif [[ "$git_ready" -eq 1 ]]; then
+  log_ok 'Git SSH already configured'
+fi
+
+if [[ "$SKIP_CLONE" != '1' && "$repo_ready" -eq 0 ]]; then
+  ensure_rules_repository
+elif [[ "$repo_ready" -eq 1 ]]; then
+  log_ok "CursorRules repo OK: $RULES_DEST"
+fi
+
+if [[ "$SKIP_PROFILE" != '1' ]]; then
+  ensure_init_cursor_profile
+fi
+
+log_ok 'Machine bootstrap complete'
@@ -0,0 +1,136 @@
+#!/usr/bin/env bash
+# Регистрирует публичные SSH-ключи в Gitea через API.
+set -euo pipefail
+
+CONFIG_DIR="${CONFIG_DIR:-$HOME/CursorRules/local}"
+HOSTS_CONFIG="${HOSTS_CONFIG:-$CONFIG_DIR/git-ssh-hosts.conf}"
+WHAT_IF="${WHAT_IF:-0}"
+
+log_step() { printf '[*] %s\n' "$1"; }
+log_ok() { printf '[+] %s\n' "$1"; }
+log_warn() { printf '[!] %s\n' "$1"; }
+
+if [[ ! -f "$HOSTS_CONFIG" ]]; then
+  echo "Config not found: $HOSTS_CONFIG" >&2
+  exit 1
+fi
+
+read_kv_file() {
+  local file="$1"
+  local line key value
+  while IFS= read -r line || [[ -n "$line" ]]; do
+    [[ "$line" =~ ^[[:space:]]*# ]] && continue
+    [[ "$line" != *=* ]] && continue
+    key="${line%%=*}"
+    value="${line#*=}"
+    key="${key%"${key##*[![:space:]]}"}"
+    value="${value#"${value%%[![:space:]]*}"}"
+    printf '%s=%s\n' "$key" "$value"
+  done < "$file"
+}
+
+declare -A PROFILE_KEYNAME PROFILE_GITEA
+current_section=''
+current_name=''
+
+while IFS= read -r line || [[ -n "$line" ]]; do
+  line="${line%%#*}"
+  line="${line%"${line##*[![:space:]]}"}"
+  [[ -z "$line" ]] && continue
+
+  if [[ "$line" =~ ^\[profile:(.+)\]$ ]]; then
+    current_section='profile'
+    current_name="${BASH_REMATCH[1]}"
+    continue
+  fi
+  if [[ "$line" =~ ^\[host: ]]; then
+    current_section=''
+    continue
+  fi
+  [[ "$line" != *=* || "$current_section" != 'profile' ]] && continue
+
+  key="${line%%=*}"
+  value="${line#*=}"
+  key="${key%"${key##*[![:space:]]}"}"
+  value="${value#"${value%%[![:space:]]*}"}"
+
+  case "$key" in
+    KeyName) PROFILE_KEYNAME["$current_name"]="$value" ;;
+    GiteaConfig) PROFILE_GITEA["$current_name"]="$value" ;;
+  esac
+done < "$HOSTS_CONFIG"
+
+SSH_DIR="$HOME/.ssh"
+MACHINE="$(hostname -s 2>/dev/null || hostname)"
+declare -A REGISTERED
+
+register_gitea_key() {
+  local cfg_file="$1"
+  local pub_path="$2"
+  local title="$3"
+
+  declare -A CFG=()
+  local kv key value
+  while IFS= read -r kv; do
+    key="${kv%%=*}"
+    value="${kv#*=}"
+    CFG["$key"]="$value"
+  done < <(read_kv_file "$cfg_file")
+
+  if [[ -z "${CFG[GiteaApiPassword]:-}" ]]; then
+    log_warn "$title : GiteaApiPassword empty — add key manually in Gitea UI"
+    cat "$pub_path"
+    return 0
+  fi
+
+  local base="${CFG[GiteaApiUrl]%/}"
+  local auth user pass pub body response
+  user="${CFG[GiteaApiUser]}"
+  pass="${CFG[GiteaApiPassword]}"
+  auth="$(printf '%s:%s' "$user" "$pass" | base64 -w0 2>/dev/null || printf '%s:%s' "$user" "$pass" | base64)"
+  pub="$(tr -d '\r\n' < "$pub_path")"
+
+  response="$(curl -fsS -H "Authorization: Basic $auth" "$base/api/v1/user/keys" 2>/dev/null || true)"
+  if [[ -n "$response" ]] && printf '%s' "$response" | grep -Fq "$pub"; then
+    log_ok "$title : key already registered"
+    return 0
+  fi
+
+  body="$(printf '{"title":"%s","key":"%s"}' "$title" "$pub")"
+
+  if [[ "$WHAT_IF" == '1' ]]; then
+    log_step "WhatIf: POST $base/api/v1/user/keys ($title)"
+    return 0
+  fi
+
+  curl -fsS -X POST -H "Authorization: Basic $auth" -H 'Content-Type: application/json' \
+    -d "$body" "$base/api/v1/user/keys" >/dev/null
+  log_ok "$title : registered"
+}
+
+for profile in "${!PROFILE_GITEA[@]}"; do
+  gitea_config="${PROFILE_GITEA[$profile]}"
+  [[ -z "$gitea_config" ]] && continue
+
+  key_name="${PROFILE_KEYNAME[$profile]}"
+  [[ -z "$key_name" || -n "${REGISTERED[$key_name]:-}" ]] && continue
+  REGISTERED["$key_name"]=1
+
+  gitea_path="$CONFIG_DIR/$gitea_config"
+  pub_path="$SSH_DIR/$key_name.pub"
+
+  if [[ ! -f "$gitea_path" ]]; then
+    log_warn "Gitea config not found: $gitea_path"
+    continue
+  fi
+  if [[ ! -f "$pub_path" ]]; then
+    log_warn "Public key not found: $pub_path (run setup-git-ssh.sh first)"
+    continue
+  fi
+
+  title="$MACHINE-$key_name"
+  log_step "Registering $key_name"
+  register_gitea_key "$gitea_path" "$pub_path" "$title"
+done
+
+log_ok 'Gitea SSH key registration done'
@@ -0,0 +1,160 @@
+#!/usr/bin/env bash
+# Генерирует SSH-ключи и ~/.ssh/config для Git-хостов из local/git-ssh-hosts.conf.
+set -euo pipefail
+
+CONFIG_DIR="${CONFIG_DIR:-$HOME/CursorRules/local}"
+HOSTS_CONFIG="${HOSTS_CONFIG:-$CONFIG_DIR/git-ssh-hosts.conf}"
+WHAT_IF="${WHAT_IF:-0}"
+
+log_step() { printf '[*] %s\n' "$1"; }
+log_ok() { printf '[+] %s\n' "$1"; }
+log_warn() { printf '[!] %s\n' "$1"; }
+
+if [[ ! -f "$HOSTS_CONFIG" ]]; then
+  echo "Config not found: $HOSTS_CONFIG" >&2
+  exit 1
+fi
+
+SSH_DIR="$HOME/.ssh"
+SSH_CONFIG="$SSH_DIR/config"
+mkdir -p "$SSH_DIR"
+chmod 700 "$SSH_DIR"
+
+declare -A PROFILE_KEYNAME PROFILE_COMMENT PROFILE_GITEA
+declare -A HOST_HOSTNAME HOST_PORT HOST_USER HOST_PROFILE
+
+current_section=''
+current_name=''
+
+while IFS= read -r line || [[ -n "$line" ]]; do
+  line="${line%%#*}"
+  line="${line%"${line##*[![:space:]]}"}"
+  [[ -z "$line" ]] && continue
+
+  if [[ "$line" =~ ^\[profile:(.+)\]$ ]]; then
+    current_section='profile'
+    current_name="${BASH_REMATCH[1]}"
+    continue
+  fi
+  if [[ "$line" =~ ^\[host:(.+)\]$ ]]; then
+    current_section='host'
+    current_name="${BASH_REMATCH[1]}"
+    HOST_HOSTNAME["$current_name"]=''
+    continue
+  fi
+  if [[ "$line" != *=* ]]; then
+    continue
+  fi
+
+  key="${line%%=*}"
+  value="${line#*=}"
+  key="${key%"${key##*[![:space:]]}"}"
+  value="${value#"${value%%[![:space:]]*}"}"
+
+  if [[ "$current_section" == 'profile' ]]; then
+    case "$key" in
+      KeyName) PROFILE_KEYNAME["$current_name"]="$value" ;;
+      KeyComment) PROFILE_COMMENT["$current_name"]="$value" ;;
+      GiteaConfig) PROFILE_GITEA["$current_name"]="$value" ;;
+    esac
+  elif [[ "$current_section" == 'host' ]]; then
+    case "$key" in
+      HostName) HOST_HOSTNAME["$current_name"]="$value" ;;
+      Port) HOST_PORT["$current_name"]="$value" ;;
+      User) HOST_USER["$current_name"]="$value" ;;
+      Profile) HOST_PROFILE["$current_name"]="$value" ;;
+    esac
+  fi
+done < "$HOSTS_CONFIG"
+
+declare -A SEEN_KEYS
+
+for profile in "${!PROFILE_KEYNAME[@]}"; do
+  key_name="${PROFILE_KEYNAME[$profile]}"
+  [[ -z "$key_name" || -n "${SEEN_KEYS[$key_name]:-}" ]] && continue
+  SEEN_KEYS["$key_name"]=1
+
+  key_path="$SSH_DIR/$key_name"
+  comment="${PROFILE_COMMENT[$profile]:-$key_name}"
+
+  if [[ ! -f "$key_path" ]]; then
+    log_step "Generating $key_name"
+    if [[ "$WHAT_IF" == '1' ]]; then
+      log_warn "WhatIf: ssh-keygen -t ed25519 -f $key_path"
+    else
+      ssh-keygen -t ed25519 -f "$key_path" -N '' -C "$comment" -q
+      chmod 600 "$key_path"
+      log_ok "key $key_name created"
+    fi
+  else
+    log_ok "key $key_name exists"
+  fi
+done
+
+update_ssh_block() {
+  local host_alias="$1"
+  local block="$2"
+  local begin="# BEGIN Setup-SshAccess:$host_alias"
+  local end="# END Setup-SshAccess:$host_alias"
+  local tmp
+  tmp="$(mktemp)"
+
+  if [[ -f "$SSH_CONFIG" ]]; then
+    awk -v begin="$begin" -v end="$end" -v block="$block" '
+      $0 == begin { skip=1; next }
+      $0 == end { skip=0; next }
+      skip { next }
+      { print }
+      END {
+        if (block != "") {
+          print block
+        }
+      }
+    ' block="$block" "$SSH_CONFIG" > "$tmp"
+  else
+    printf '%s\n' "$block" > "$tmp"
+  fi
+
+  if [[ "$WHAT_IF" != '1' ]]; then
+    mv "$tmp" "$SSH_CONFIG"
+    chmod 600 "$SSH_CONFIG"
+  else
+    rm -f "$tmp"
+  fi
+}
+
+for host_alias in $(printf '%s\n' "${!HOST_HOSTNAME[@]}" | sort); do
+  profile="${HOST_PROFILE[$host_alias]:-}"
+  key_name="${PROFILE_KEYNAME[$profile]:-}"
+  if [[ -z "$profile" || -z "$key_name" ]]; then
+    echo "Host $host_alias: unknown profile" >&2
+    exit 1
+  fi
+
+  block="# BEGIN Setup-SshAccess:$host_alias
+Host $host_alias
+    HostName ${HOST_HOSTNAME[$host_alias]}
+    User ${HOST_USER[$host_alias]}
+    Port ${HOST_PORT[$host_alias]}
+    IdentityFile ~/.ssh/$key_name
+    IdentitiesOnly yes
+    AddKeysToAgent yes
+    StrictHostKeyChecking accept-new
+# END Setup-SshAccess:$host_alias"
+
+  if [[ "$WHAT_IF" == '1' ]]; then
+    log_step "WhatIf: ssh config block for $host_alias"
+  else
+    update_ssh_block "$host_alias" "$block"
+    log_ok "ssh config: $host_alias"
+  fi
+done
+
+if [[ "$WHAT_IF" != '1' ]]; then
+  eval "$(ssh-agent -s)" >/dev/null
+  for key_name in "${!SEEN_KEYS[@]}"; do
+    [[ -f "$SSH_DIR/$key_name" ]] && ssh-add "$SSH_DIR/$key_name" >/dev/null 2>&1 || true
+  done
+fi
+
+log_ok 'SSH setup complete'
Author	SHA1	Message	Date
PapaTramp	e1ba24eb74	init-cursor: ASCII-подсказка после dot-source (без em dash).	2026-06-19 23:43:33 +10:00
PapaTramp	7388ef1462	README: краткая шпаргалка; install.sh как install.ps1 (SSH/HTTPS авто).	2026-06-19 23:41:57 +10:00
PapaTramp	2e3b303029	init-cursor: подсказка после dot-source.	2026-06-19 23:37:35 +10:00
PapaTramp	584ddde1d1	Set-GitRemotes: имя repo из remote URL, не из имени папки.	2026-06-19 23:34:45 +10:00
PapaTramp	25f4d5972e	install.ps1: backup старого CursorRules, fix вызова init-cursor.	2026-06-19 23:33:53 +10:00
PapaTramp	12dd597360	install: SSH clone first; убрать irm для приватного repo.	2026-06-19 23:32:31 +10:00
PapaTramp	e1078dc6ed	Setup-GitSsh: писать ssh config без UTF-8 BOM.	2026-06-18 11:34:18 +10:00
PapaTramp	4caedb3074	Remotes: kalinamall, home, github по SSH (.ru); origin убран. Set-GitRemotes переименует origin по хосту; SSH config для .ru через LAN IP.	2026-06-18 11:34:03 +10:00
PapaTramp	7f8e7c0cb2	init-cursor: авто-bootstrap git на новом ПК, install.ps1 с Gitea. Один вызов init-cursor настраивает SSH при необходимости и копирует rules в проект.	2026-06-18 11:23:30 +10:00
PapaTramp	bdf405e2c1	Добавить bootstrap для новых ПК и Linux-скрипты. SSH-ключи и Gitea API до clone Rules; init-cursor копирует из локального $HOME/CursorRules.	2026-06-18 10:01:11 +10:00